Stealth Motorized License Plate Flipper — Single Kit (USA/Canada)
A motorized hinge rotates the plate assembly. Confirm the available depth and camera clearance before ordering.
For off-road use, car shows, car meets, track days, and photo shoots. Laws vary by jurisdiction.
in 1–2 Business Days
Shipping USA
Available
on Every Unit
Included
Specs, Fitment & What Is Included.
Built for clean show-car installations, the PlateVanish Stealth Flipper is a remote-controlled, motorized license plate flipper for one standard USA or Canada plate. Tap the wireless remote to rotate the mounted plate, then tap it again to return the plate to its normal position.
The Single Plate Kit can be installed at the front or rear of a compatible vehicle with sufficient clearance. It is intended for car shows, track events, photo shoots, garage displays and other off-road or private-property uses.
Why Choose the Stealth Flipper?
- Motorized plate movement: The powered bracket physically rotates the mounted plate.
- Wireless operation: Control the system from inside or near the vehicle using the included remote.
- Single-plate configuration: Install it at one compatible front or rear plate location.
- 12V vehicle power: The control unit connects to the vehicle’s 12V electrical system.
- North American plate fitment: Designed for one standard USA or Canada license plate.
Confirm Your Clearance Before Ordering
The plate needs an unobstructed path to complete its full rotation. Before ordering, inspect and measure the area around your plate mount. Make sure the plate will not contact the bumper, grille, trim, parking sensors, hitch accessories or bodywork while moving.
The Stealth Flipper works best on vehicles with an open plate mounting area. Fitment depends on the vehicle and installation location, so plate compatibility alone does not guarantee vehicle compatibility.
What’s Included
- 1 motorized Stealth Flipper assembly for one plate
- 1 wireless remote
- 1 control unit
- 1 12V power cable
- 1 cable connector
- Mounting hardware
Product Specifications
- Configuration: Single plate
- Installation location: Compatible front or rear plate mount
- Operation: Wireless remote control
- Mechanism: Motorized rotating plate bracket
- Power: 12V vehicle electrical connection
- Plate compatibility: Standard USA and Canada license plates
- Warranty: One year from the date of receipt
How the License Plate Flipper Works
Press the remote and the powered bracket rotates the mounted plate into its alternate position. Press the remote again to return the plate to its normal position. Allow the motor to complete each movement before activating it again.
The mechanism physically rotates the plate. It does not use LCD glass, electronic tint, film or a sliding cover.
Installation
- Measure the plate mounting area and confirm an unobstructed rotation path.
- Remove the existing plate from the chosen front or rear location.
- Secure the Stealth Flipper assembly using the included mounting hardware.
- Route the power wiring into the appropriate cabin, trunk or interior area.
- Connect the control unit to a suitable 12V power source.
- Test several complete cycles and confirm that the plate moves without rubbing, binding or contacting the vehicle.
Installation and wire routing vary by vehicle. Professional installation is recommended if you are not experienced with automotive wiring or accessory installation.
Single Kit or Double Kit?
Choose the Single Plate Kit for one compatible front or rear mounting location. A separate double configuration is available for vehicles requiring matching front-and-rear assemblies.
Warranty and Replacement Parts
The Stealth Flipper includes a one-year warranty from the date of receipt covering manufacturing defects under normal use. Replacement components and troubleshooting assistance are available through PlateVanish support. Keep your order number and provide clear photos or video when requesting assistance.
Frequently Asked Questions
What is a license plate flipper?
A license plate flipper is a powered bracket that rotates a mounted plate between two positions. The PlateVanish Stealth Flipper uses a 12V motorized assembly operated by a wireless remote.
Is a registration plate flipper the same as a number plate flipper?
Yes. License plate, registration plate and number plate are regional terms for a vehicle plate. This version is specifically designed for standard USA and Canada plate dimensions.
Does the kit include a remote?
Yes. The kit includes a wireless remote, control unit, 12V power cable, connector and mounting hardware.
Will it fit my vehicle?
Vehicle compatibility depends on the available space around the plate mount. The product fits one standard USA or Canada plate, but you must also confirm that the plate has enough clearance to complete its full rotation.
Can it be installed at the front or rear?
Yes. It can be installed at either location when the mounting area provides sufficient space, secure attachment points and a clear rotation path.
Can I rotate the bracket by hand?
No. Operate the bracket with the wireless remote and allow the motor to finish each cycle. Forcing the mechanism by hand can damage the motor or bracket.
How should I maintain the system?
Keep the rotation path clear, inspect the mounting hardware periodically and avoid directing a pressure washer at the motor, wiring or control unit.
Intended Use and Legal Notice
This product is intended for car shows, track events, photo shoots, garage displays and other off-road or private-property uses. Do not activate it while driving on public roads. Laws vary by location; check all applicable requirements before purchasing, installing or using the product. PlateVanish is not responsible for unlawful installation or use.