Stealth PDLC License Plate Fogger - Instant Privacy Shield (Single Plate USA/Canada)
in 1 to 2 Bus. Days
Shipping USA
Available
on Every Unit
Included
The PlateVanish Stealth PDLC License Plate Fogger Single Kit is a remote-controlled PDLC license plate cover built for one standard USA or Canada plate. Instead of turning solid black or moving mechanically, the Fogger uses PDLC smart film technology to switch between a powered clear mode and an unpowered frosted privacy mode.
This kit is made for customers who want a clean frosted plate display effect without a sliding curtain, flip bracket, or black LCD-style panel. It is designed for car shows, track events, photo shoots, garage display, off-road setups, and private-property use.
When the kit has power, the PDLC panel stays clear so the plate can remain visible. When power is turned off, the panel naturally returns to its fogged or frosted white privacy state.
Why Choose the Fogger Single Kit?
- PDLC smart film technology: Switches between powered clear mode and unpowered frosted mode.
- Remote-controlled operation: Use the included remote and control unit to change modes.
- No moving cover mechanism: No sliding curtain, no rotating bracket, and no mechanical plate movement.
- Single plate setup: Covers one standard USA or Canada plate, front or rear.
- Frosted privacy effect: A softer electronic alternative to a black blackout-style cover.
- Built for display use: Ideal for shows, track days, photos, garage display, and off-road use.
Important Power Mode Notice
The Fogger uses PDLC smart film, which means the clear state requires power.
- Power on: Clear mode
- Power off: Fogged or frosted mode
If you want the Fogger to remain clear while the vehicle is parked, it can be wired to a constant 12V power source or directly to the vehicle battery with proper installation. The system draws very little power, approximately 0.06A, but wiring should always be done safely and cleanly.
What's in the Box?
- 1x Stealth PDLC Fogger cover for one plate
- 1x PDLC smart film plate panel
- 1x Wireless remote
- 1x Control unit
- 1x 12V power cable
- 1x Cable connector
- 1x Mounting hardware set
Specs at a Glance
- Product type: Remote-controlled PDLC license plate cover
- Technology: PDLC smart film
- Powered state: Clear mode
- Power-off state: Frosted white privacy state
- Kit type: Single plate kit
- Plate position: Front or rear
- Power: 12V vehicle power
- Power draw: Approximately 0.06A
- Fits: Standard USA and Canada plates
- Warranty: 1 year from date of receipt
How It Works
The Fogger uses PDLC smart film to create its privacy effect. When powered on, the film appears clear. When power is turned off, the film returns to a frosted white privacy state across the plate cover.
This makes the Fogger different from other PlateVanish kits. The Blackout creates a dark display effect, the Curtain slides a physical cover across the plate, and the Flipper physically rotates the plate. The Fogger uses PDLC film for a clean frosted effect with no moving cover mechanism.
Clear Mode vs Fogged Mode
| Mode | Power State | What You See | Best For |
|---|---|---|---|
| Clear Mode | Power on | The plate area appears clear and visible | Display setup when you want the plate visible |
| Fogged Mode | Power off | The plate area returns to a frosted white privacy effect | Shows, photos, track events, garage display, and private-property use |
Installation Overview
- Remove your existing plate from the front or rear mounting location.
- Mount the Fogger cover at the plate location using the included hardware.
- Route the power wire into the cabin, trunk, or interior area depending on your vehicle layout.
- Connect the control unit to 12V power using the included wiring.
- Test the remote and confirm the cover switches between clear and fogged modes.
- Check the panel and wiring to make sure everything is seated cleanly and secure.
Exact wire routing depends on the vehicle. Many vehicles have existing trunk openings, trim gaps, or grommet areas that can be used for a cleaner install.
Fogger vs Blackout vs Curtain vs Flipper
| Feature | Fogger | Blackout | Curtain | Flipper |
|---|---|---|---|---|
| Effect | Clear to frosted white | Dark blackout display | Sliding physical cover | Rotating plate |
| Technology | PDLC smart film | Switchable glass panel | Motorized curtain | Motorized flipper |
| Moving mechanism | No | No | Yes | Yes |
| Best for | Frosted privacy display effect | Dark premium display effect | Visible-to-covered movement | Dramatic flip movement |
Frequently Asked Questions
What is a PDLC license plate cover?
A PDLC license plate cover uses smart film technology to switch between powered clear mode and unpowered frosted mode. The PlateVanish Fogger Single Kit is remote controlled and built for one standard USA or Canada plate.
Is the Fogger clear when powered on?
Yes. The Fogger is designed to be clear when powered on. Clear mode requires power because of how PDLC smart film works.
Is the Fogger fogged when powered off?
Yes. When power is turned off, the PDLC panel naturally returns to its fogged or frosted white privacy state.
Does the Fogger turn black?
No. The Fogger creates a frosted white effect. It is not a clear-to-black product.
Is the Fogger the same as the Blackout?
No. The Fogger uses PDLC film for a clear-to-frosted effect. The Blackout uses a different switchable glass setup for a darker blackout display effect.
Should I choose Single or Front and Rear?
The Single Kit covers one plate, front or rear. Choose a front-and-rear version if your vehicle uses plates on both ends and you want a matched setup.
Does it fit standard USA and Canada plates?
Yes. The USA/Canada version is built for standard 12" x 6" plates. Confirm your plate size and mounting area before ordering.
Warranty and Support
Every PlateVanish Stealth PDLC License Plate Fogger Single Kit is backed by a 1-year warranty from the date of receipt for manufacturer defects under normal use.
PlateVanish ships from Glendale, Arizona, USA. Orders are processed and dispatched within 1 to 2 business days with free shipping on USA orders. Support responds within 24 hours on business days.
Care Tips
- Keep the panel clean: Wipe with a soft, dry cloth to remove dust, water spots, and road grime.
- Avoid abrasive cleaners: Do not use harsh chemicals or rough pads on the PDLC panel surface.
- Avoid direct pressure washing: Do not pressure wash directly against the panel face, wiring connections, or control components.
- Test monthly: Confirm the panel transitions cleanly between clear and frosted modes.
- Protect wiring: Keep wiring away from sharp edges, moving parts, and heat sources.
Intended Use and Legal Notice
- Off-road and display use only: Designed for car shows, track events, photo shoots, garage display, and private-property use.
- Legal disclaimer: Do not activate while driving on public roads. PlateVanish is not responsible for misuse or legal consequences from improper use. Check your local regulations before purchase or use.