Stealth PDLC License Plate Fogger - Complete Front & Rear Privacy System (USA/Canada)

The PlateVanish Stealth Plate Fogger Front and Rear Kit is a front and rear PDLC license plate cover setup built for vehicles that use standard USA or Canada plates on both ends. Instead of turning solid black or moving mechanically, each Fogger cover uses PDLC smart film technology to switch between a powered clear mode and a power-off frosted privacy effect.

If you want a privacy license plate cover for both front and rear plates, but do not want LCD blackout glass, a sliding curtain, or a rotating flipper bracket, this is the PlateVanish kit made for a clean frosted look on both ends of the vehicle.

The Fogger Front and Rear Kit is the softer electronic double-kit option in the PlateVanish lineup. When the kit is powered on, the plate covers stay in their clear state so the plates can remain visible. When power is turned off, the covers naturally return to their fogged or frosted white privacy state. No solid black blackout panel. No curtain movement. No plate rotation.

---

Why Choose the PlateVanish Fogger Front and Rear Kit?

• Front and rear PDLC license plate cover: Built for vehicles that use plates on both ends.
• Remote-controlled operation: Switch both covers between powered clear mode and power-off frosted mode.
• PDLC smart film technology: Uses electronic smart film instead of a sliding cover or rotating bracket.
• Powered clear state: When powered on, both covers appear clear so the plates can remain visible.
• Fogged power-off state: When power is turned off, both covers return to a frosted white privacy effect instead of a solid black panel.
• No moving cover mechanism: No sliding curtain, no rotating flipper, and no mechanical plate movement.
• Matched front-and-rear setup: Gives both plate areas the same Fogger effect.
• Good Blackout alternative: Best for buyers who want an electronic plate cover but prefer the frosted PDLC look.
• Built for display use: Designed for car shows, track days, photo shoots, garage display, and off-road use.

---

What’s in the Box, Front and Rear Kit

• 2x Stealth Plate Fogger PDLC covers for front and rear plate use
• 2x PDLC smart film plate panels
• Remote control setup
• Control unit setup
• 12V power wiring set
• Cable connectors
• Mounting hardware set, designed to mount at the plate locations

---

Specs at a Glance

• Product type: Front and rear remote-controlled PDLC license plate cover
• Technology: PDLC smart film
• Powered state: Clear mode
• Power-off state: Frosted white privacy state
• Cover style: Electronic privacy cover with no moving cover mechanism
• Operation: Remote controlled
• Kit type: Front and rear plate kit
• Plate position: Front and rear
• Power: 12V vehicle power
• Fits: Standard USA and Canada plates for the USA/Canada version
• Use case: Car shows, track events, photo shoots, garage display, and off-road use
• Warranty: 1 year from date of receipt

---

How This Front and Rear PDLC License Plate Cover Works

The Fogger Front and Rear Kit uses PDLC smart film to create its privacy effect on both plate locations. When the kit is powered on, each film panel appears clear so the plates can remain visible. When power is turned off, the covers return to their frosted white privacy state across both plate areas.

This makes the Fogger different from every other PlateVanish kit. The Blackout uses LCD glass and creates a dark blackout effect. The Curtain slides a cover across the plate. The Flipper physically rotates the plate. The Fogger uses PDLC film to create a frosted privacy effect with no moving cover mechanism.

If you want a frosted license plate cover for both front and rear plates, and you prefer the PDLC look over a solid black panel or a moving mechanism, the Fogger Front and Rear Kit is the right fit.

---

Built for Full Front and Rear Display Setups

The Fogger Front and Rear Kit is made for vehicles that need a matched front-and-rear frosted plate display setup. It is a strong choice for car shows, track events, garage display, private shoots, content creation, and off-road setups where you want both plate areas to match.

Instead of using tape, temporary covers, or manual plate removal, this switchable license plate cover setup gives you a remote-controlled way to switch both plate areas between powered clear mode and power-off frosted display mode.

---

Installation Overview

1. Remove your existing plates from the front and rear mounting locations.
2. Mount each PlateVanish Fogger cover at the plate locations using the included hardware.
3. Route the power wiring into the cabin, trunk, or interior area depending on your vehicle layout.
4. Connect the control system to 12V power using the included wiring.
5. Test the remote and confirm both covers switch between clear and frosted states.
6. Check both panels after installation to make sure the plate areas are seated cleanly and the wiring is secure.

Exact wire routing depends on the vehicle. Many vehicles have existing trunk openings, trim gaps, or grommet areas that can be used for a cleaner install.

If you want the Fogger to stay clear when the vehicle is off, the kit can be wired to a constant 12V power source or directly to the vehicle battery with proper installation. If you prefer the kit to only be clear while the vehicle is running, it can be wired to a switched 12V source instead.

---

Single Kit vs Front and Rear Kit

The Single Kit covers one plate, front or rear. It is the right choice if your vehicle only needs one plate covered for display use, or if you only want the Fogger effect on one end of the vehicle.

The Front and Rear Kit covers both front and rear plates. It is the better choice if your vehicle uses plates on both ends and you want a matched PDLC setup.

---

Fogger vs Blackout vs Curtain vs Flipper

Each PlateVanish kit creates a different effect. Choose the one that fits your vehicle, your display goal, and your install preference.

• Fogger / PDLC: Uses PDLC film. Clear when powered on and frosted white when powered off. Best for buyers who want a softer electronic look.
• Blackout: Uses LCD glass to create a dark blackout effect. Best for the cleanest premium black display effect.
• Curtain: Uses a motorized sliding cover. Best for buyers who want a physical cover that moves across the plate.
• Flipper: Rotates the plate using a physical flip mechanism. Best for buyers who want dramatic movement and have enough mounting clearance.

Choose the Fogger Front and Rear Kit if you want a remote-controlled electronic plate cover for both ends of the vehicle with a frosted PDLC effect instead of a solid black panel or moving mechanism.

---

How PlateVanish Fogger Front and Rear Compares

Feature	Fogger Front and Rear	Fogger Single	Blackout	Curtain	Flipper
Coverage	Front and rear plates	One plate	Single or double options	Single or double options	Single or double options
Effect	Clear when powered on, frosted white when powered off	Clear when powered on, frosted white when powered off	Dark blackout display effect	Sliding cover	Rotating plate
Technology	PDLC smart film	PDLC smart film	LCD glass	Motorized curtain	Motorized flipper
Moving cover mechanism	No	No	No	Yes, sliding cover	Yes, rotating bracket
Remote controlled	Yes	Yes	Yes	Yes	Yes
Best for	Front and rear frosted privacy effect	One-plate frosted privacy effect	Premium black display effect	Simple sliding cover effect	Dramatic flip movement

---

Important Difference From a Clear-to-Black Product

The Fogger is not a clear-to-black plate cover. It uses PDLC film, which is designed to be clear while powered on and fogged or frosted while powered off.

With the current switchable film technology used in PlateVanish kits, we do not offer a film-based option that is fully clear by default and then switches to solid black. If you want a true visible-to-fully-covered effect, the current PlateVanish option would be the License Plate Curtain, which uses a physical sliding cover instead of switchable film.

---

Why This Is Different From a Static Frosted or Tinted Cover

A static tinted or frosted cover stays the same all the time. The PlateVanish Fogger is a remote-controlled privacy license plate cover that changes state using PDLC smart film. When powered on, the plates can remain visible. When power is turned off, the covers return to a frosted display effect.

That difference matters if you want a cleaner and more intentional setup for shows, photos, track days, or private-property display. You are not just adding smoked frames. You are adding a switchable electronic plate cover system for both ends of the vehicle.

---

Frequently Asked Questions

---

Warranty and Support

Every PlateVanish Stealth Plate Fogger Front and Rear Kit is backed by a 1-year warranty from the date of receipt for manufacturer defects under normal use.

PlateVanish ships from Glendale, Arizona, USA. Orders are processed and dispatched within 1 to 2 business days with free shipping on USA orders. Support responds within 24 hours on business days.

---

Keeping Your Fogger Kit Running

• Keep the panels clean: Wipe with a soft, dry cloth to remove dust, water spots, and road grime.
• Avoid abrasive cleaners: Do not use harsh chemicals or rough pads on the PDLC panel surfaces.
• Avoid direct pressure washing: Do not pressure wash directly against the panel faces, wiring connections, or control components.
• Test clear and frosted cycles monthly: Confirm both panels transition cleanly in both directions, especially between events.
• Check the power connection: If the panels do not stay clear, inspect the wiring path, control unit, and 12V connection.
• Protect wiring during install: Keep wiring away from sharp edges, moving parts, and heat sources.

---

Intended Use and Legal Notice

• Off-road and display use only: Designed for car shows, track events, photo shoots, garage display, and private-property use.
• Legal disclaimer: Do not activate while driving on public roads. PlateVanish is not responsible for misuse or legal consequences from improper use. Check your local regulations before purchase or use.